The DW735 Planer Blades are the perfect choice for a variety of woodworking projects. With their sharp edges and long-lasting durability, these blades can handle a wide range of wood thicknesses and textures. They are designed to provide a precise and consistent finish on hardwoods, softwoods, and other materials. They are also easy to install and maintain. So, if you’re looking for an efficient and reliable planer blade, the DW735 is the perfect choice.
With so many planer blades for dw735 brands on the market like Byrd Tool, DEWALT, TJATSE, HZ, it can be tough to know which one is right for you. Don’t worry, we’ve got you covered.1. Byrd Tool OEM Shelix cutterhead for Dewalt pl
Our Rating
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
- Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts.
- Made in the USA!
2. Byrd Tool Shelix cutterhead for Dewalt planer
Our Rating
- Cutterhead diameter is 0. 088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives. Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut (slices the wood) which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment
3. DEWALT Planer Blades for DW735, 13-Inch (DW73
Our Rating
- M2 laminated tool steel of DEWALT planer blades stays sharper and lasts longer than conventional knife materials
- Machined locator holes help users align knives on cutter head during knife change
- Generates a snug fit around pins on cutter-head
- M2 laminated tool steel stays sharper and lasts longer than conventional knife materials
- Machined locator holes help users align knives on cutter-head during knife change
- Generates a snug fit around pins on cutter-head
- Double sided for continual performance
- Cost effective alternative to sharpening
4. Upgraded Helical Cutterhead for 13″ DeWalt Pl
Our Rating
- UPGRADED CUTTERHEAD-The TJATSE 13″ Helical Cutterhead is designed to replace the straight knife cutterhead on the DeWalt DW735 and DW735X Planers. Takes the performance of your Dewalt planer to the next level and cuts smoothly through your wood planing projects with ease.
- CUT IMPROVEMENT-Helical cutter head features smaller which contact the wood and an angle shearing the fibers rather than tearing at them, the cutting performance is excellent and the slight bit of snipe that was getting with the straight knives is completely gone, the wood surface would be so much smoother.
- AMAZING NOISE REDUCTION-The biggest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads.
- LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving.
- BRAND QUALITY WARRANTY-Package included 1 x 13” helical cutterhead; 56 x carbide inserts; 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. The TJATSE Customer Service and Technical Support Teams are all days online for help.
5. 13-Inch Planer Blades Replacement for DeWalt
Our Rating
- 13-inch Planer Blades Replacement for DeWalt DW735 DW735X Planer, Replac DW7352
- Made of High Speed Steel for longer cutting life
- 2 Set(6PCS), Plastic case packaging
- Double-edged “reversable” high-speed steel construction
- Blade material: M2/SKH51/W6Mo5Cr4V2 Hardness: HRC 65-68°
Best planer blades for dw735 Buying guide
When shopping for planer blades for a DW735, consider factors such as compatibility, quality, and features. Before purchasing, make sure the blades are compatible with your model of DW735. Quality should be a top priority, as higher quality blades will last longer and provide better results. Finally, look for features that suit your needs, such as carbide-tipped blades for tougher materials or reversible blades for longer life. With these factors in mind, you can find the best planer blades for your DW735.