Aluminum Stick Welding Rods are the perfect solution for a variety of welding projects. They provide superior strength and superior penetration, making them ideal for welding aluminum and other non-ferrous metals. They are also the most cost-effective choice for welding aluminum. They are easy to use and provide a clean, consistent weld. Aluminum Stick Welding Rods can be used for both Tig and Mig welding, making them a great choice for any welding job.
With so many aluminum stick welding rods brands on the market like SÜA WELDING TECHNOLOGIES, AZB, Hobart, Cloud Fire, it can be tough to know which one is right for you. Don’t worry, we’ve got you covered.1. SÜA – Aluminum E4043 Stick Electrode Rod 3/32
Our Rating
- SÜA – E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes and it provides a gas atmosphere to protect the arc.
- ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***
- Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance. Good weldability; rapid ignition and re-ignition, little splashing, easy removal of oxides, the characteristics of the joints are particularly good. Good capillary fluidity.
- Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates.
- These Electrodes are 14 inches long and are available in Sizes: 3/32″, 1/8″ and 5/32″ – Available Packages: 0.5 Lb, 1 Lb and 2 Lb – Select your option from the Size Menu – Check Picture #2 for an approximate number of electrodes per pound.
2. 100 Pieces Flux Core Aluminum Rods Low Temper
Our Rating
- NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use.
- HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material.
- PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity.
- WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals.
- AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately.
3. Hobart H722844-RDP 1/8-Inch 4043 Aluminum Ele
Our Rating
- These 1/8″ x 14″ Aluminum Electrodes are for 4043 aluminum welding for flat, horizontal and vertical applications
- DC (electrode positive) only
- Manufactured in South Korea
- Aluminum welding for flat, horizontal and vertical applications.
- DC (electrode positive) only.
4. 20 Sticks Aluminum Welding Rods Aluminum Braz
Our Rating
- MATERIAL: 20 Rods 1/16″ x 16.93″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%.
- ADVANTAGES: Brazing temperature range: 410-450°F. Solidus: 410°F, Liquidus: 450°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces.
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use.
- APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser; crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding.
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better.
5. 50 Pieces Flux Core Aluminum Rods Low Tempera
Our Rating
- NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use.
- HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material.
- PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity.
- WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals.
- AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately.
Best aluminum stick welding rods Buying guide
Aluminum stick welding rods come in a variety of shapes and sizes, making it important to choose the right one for your project. Here are some tips to help you choose the best aluminum stick welding rod for your project:
• Consider the type of aluminum you are working with. Different types of aluminum require different types of welding rods.
• Look for rods that have a high silicon content. This helps to reduce welding splatter and improves the appearance of the weld.
• Choose rods that are specifically designed for aluminum stick welding. This will ensure that the rods are specifically designed for aluminum and will provide the best results.
• Look for rods that have a low melting point. This will help to ensure that the rods will not become too hot too quickly, which could cause damage to the aluminum.
• Make sure the rods you choose are compatible with the type of welding machine you have. Different welding machines require different types of rods.
• Check the packaging for any safety warnings or special instructions. This will help to ensure that you are using the rods correctly and safely.