The best sander for cedar siding is one that can sand down the wood evenly and gently, while still being powerful enough to remove any dirt, grime, and old paint. It should also have a dust collection system for easier cleanup. Look for sanders that have adjustable speed settings and are easy to maneuver. A good sander will help you achieve a smooth, professional-looking finish on your cedar siding.
With so many sander for cedar siding brands on the market like Pacific Coast Feather, CertainTeed, Ready Seal, Xtract, it can be tough to know which one is right for you. Don’t worry, we’ve got you covered.1. 18″ Western Red Cedar Shingles Natural Groove
Our Rating
- 18″ certigrade natural grooved shingles
- 100 Square Feet when installed at 14″ exposure
- 50 square feet when installed at a 7″ exposure
- 28/28 pack
- Shingles are 18″ long with varied widths
2. Western Red Cedar Shingles Red Label in Contr
Our Rating
- Western Red Cedar Shingle
- 18” long and 3” to 8” wide shingles
- 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness
- Covers 20-25 square feet with a 7″ exposure of the shingle
- ***This product cannot ship to P.O. box. Ships to Continential US only***
3. Cedar Impressions Double 7in. Staggered Perfe
Our Rating
- Limited lifetime warranty, Made in the USA
- Patented PanelThermometer for precise installation
- Made of injection molded, durable polymer, molded Perimeter Lock helps create a virtually seamless appearance
- Siding Width: 14in., Thickness: .125in., Panel Projection 1in.
- Pieces per carton: 11, Weight: 42lbs., Covers 44 feet
4. Ready Seal 512 5-Gallon Pail Natural Cedar Ex
Our Rating
- Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
- May be applied using sprayer, roller or brush onto the woods surface.
- Requires no back brushing and will nerver leave runs, laps, or streaks.
- Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
- Requires no diluting or thinning prior to spray applications.
- Subject to or will include a PaintCare recycling fee in the following states: CT, orxa0VT. Not available in CA.
- Easy maintenance – no sanding or stripping required for re-application
- “Goof Proof” application
- No laps, runs or streaks
- No back brushing
- Apply in any temperature
- Subject to or will include a PaintCare recycling fee in the following states: CA, OR, CT, VT
5. 3M Xtract Electric Random Orbital Sander, Erg
Our Rating
- HIGH QUALITY ELECTRIC ROS: Built with high-quality components that stand up to long hours on the shop floor
- POWERFUL AND PRECISION-BALANCED MOTOR: Whisper quiet for precision-balanced motor for smoother running
- ERGONOMIC LOW-PROFILE DESIGN: Smaller and lighter (3 lb) than traditional electric sanders. The composite cover is completely encased with 3M Gripping Material, increasing operator control while absoring and reducing vibration
- SAFETY FUNCTION: Automatically switch to “Stand-By” mode if left un-used for 5 minutes
- PART OF THE 3M XTRACT CLEAN SANDING SOLUTIONS: When used with 3M Xtract Net Discs and dust extraction, the sytem extracts up to 97% of the dust created during sanding
- For industrial/occupational use only. Not for consumer sale or use.
Best sander for cedar siding Buying guide
When buying a sander for cedar siding, it is important to consider a few key features. First, look for a sander that has an adjustable speed setting to ensure you can adjust the speed according to the type of siding you are sanding. Second, a sander with a dust collection system is essential to keep your workspace clean. Third, make sure that the sander has a reliable power source and is easy to maneuver. Finally, look for a sander with a long sanding pad to cover more area with each pass. With these features in mind, you can choose the best sander for your cedar siding project.