With so many oscillating edge/belt spindle sander brands on the market like WEN, Triton, Shop Fox, it can be tough to know which one is right for you. Don’t worry, we’ve got you covered.
1. WEN 6524 Oscillating Belt and Spindle Sander
Our Rating
- Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
- Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
- The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
- Onboard storage maintains organization of all accessories and sandpapers
- Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)
2. Triton TSPST450 450W /3.5 Amp Oscillating Spi
Our Rating
- Large cast aluminum table with 0-45 degree tilting front section for flatness, accuracy and strength
- Rotating and vertically oscillating sanding action for the perfect balance between work rate and control
- 5 x sanding sleeves (1/2″ – 2″ dia) and matching drums provide maximum versatility with intricate, shaped workpieces
- All metal belt sander unit with easy belt change provides maximum workrate with straigh and shaped workpieces
- On-board storage slots keeps accessories with the tool for rapid mode changing and convenience
- Vented throat plates and under table dust channel for optimised dust and chippings extraction prociding a cleaner and safer working environment
3. Shop Fox W1730 – Oscillating Edge Sander
Our Rating
- Motor: 2 HP, 240V, single-phase, 1725 RPM
- Precision-ground cast-iron tables
- Table size: 26-7/8″ x 12″
- Table travel: 3-3/4″ vertical
- Aux. table size: 10″ x 11-1/2″, travel: 10″
4. WEN 6510T 3.5 Amp Oscillating Spindle Sander,
Our Rating
- Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
- Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
- Attach the dust collector of your choice to the onboard dust port to minimize clean-up
5. WEN HA5932 5-Amp Variable Speed Portable Osci
Our Rating
- Lightweight and portable design allows for easy handheld sanding in hard-to-reach places
- Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware
- Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke
- Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles
- Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty
Best oscillating edge/belt spindle sander Buying guide
When looking for an oscillating edge/belt spindle sander, there are a few key factors to consider. First, decide what size of sander you need. If you are working on small projects or need to sand tight corners, a smaller sander will work best. On the other hand, if you are working on larger projects or need to sand large surfaces, a larger sander may be necessary.
Another important factor is the power of the motor. The motor should be powerful enough to handle the type of projects you will be working on. The higher the power, the more powerful the sander.
The sanding belt should also be considered. It is important to look for a sander that has a variety of sanding belt sizes and grits. This will allow you to work on a variety of projects with different levels of sanding needs.
Finally, the dust collection system should be considered. A good dust collection system will help keep your workspace clean and free of dust. Look for a sander that has an efficient dust collection system that can capture most of the dust created during sanding.